Dealers Needed

Buy AMSOIL at Wholesale Prices
Become A Preferred Customer

Frequently Asked Questions

Satisfied Customers

Motorcycle Products

Motorcycle Oils

Motorcycle Air/Oil Filters

Motorcycle Suspension Fluids

Motor Oils

Racing Motor Oils

Diesel Oils

Oil Filters

Air Filters

2-Cycle Oils

4-Stroke Oils

Gear Lubricants

Racing Gear Lubricants

Transmission Fluids

Fuel Additives

Brake Fluid

Power Steering Fluid


Hydraulic Oils

Compressor Oils

Wiper Blades

Spark Plugs/Wire Sets




Industrial Products

Motor Oil Test and Comparison

AMSOIL vs. Mobil 1

409,000-Miles Without An Oil Change

AMSOIL Excels in API Sequence IIIF Performance Test

Motor Oil Performance Tests & Comparisons

Temperature Extremes Call For Superior Motor Oils

Why Harley-Davidson Owners Choose AMSOIL

Synthetic Motorcycle Oil & Harley-Davidson Warranty Issues

AMSOIL Synthetic Gear Lube Outperforms Valvoline Gear Lube

8.2% More MPG With AMSOIL Synthetic Lubricants

AMSOIL Proves Superior In Clark County Field Test

AMSOIL Series 3000 Synthetic 5W-30 Heavy Duty Diesel Oil is Correct Choice for Jeff Foster Trucking

AMSOIL Products Improve Efficiency and Reduce Operating Costs for Gerlach Trucking

What is the Noack Volatility Test?

What is the Four-Ball Wear Test?

What is TBN?


To order a free catalog | Click here |

To buy AMSOIL products, visit the AMSOIL Online Store

| Buy AMSOIL at wholesale prices |

Buy AMSOIL By Phone from AMSOIL Headquarters
7am-5pm Central Time, Toll-Free at: 1-800-777-7094

Give Operator Sponsor # 504006
For Fastest Service

Buy AMSOIL at Wholesale Prices AMSOIL Synthetic Gasonline Motor Oils AMSOIL Synthetic Diesel Motor Oils
AMSOIL Synthetic European Motor Oils AMSOIL Synthetic Racing Motor Oils AMSOIL Synthetic Motorcycle Motor Oils
AMSOIL Synthetic 2-Stroke Motor Oils AMSOIL Synthetic 4-Stroke Motor Oils AMSOIL Synthetic Tansmission Fluids
AMSOIL Synthetic Gear Lubes AMSOIL Synthetic Greases AMSOIL Synthetic Hydraulic Oils
AMSOIL Synthetic Compressor Oils AMSOIL Gasoline Fuel Additives AMSOIL Diesel Fuel Additives
AMSOIL Filtration Products AMSOIL Other Products Buy AMSOIL at Wholesale Prices

Which AMSOIL Products Are Recommended For Your Vehicles?

| Click Here And Enter Your Vehicle Information To Find Out |

Coolant Systems Require Regular Maintenance

Neglecting coolant-system maintenance can result in serious damage and failure in other in other components, including the engine.

Dan Peterson, Vice President, AMSOIL Technical Development

Dan Peterson
Vice President,
Technical Development

Why is engine coolant so often neglected? We spend a great deal of time checking motor oil level and making sure it is changed at the correct interval, but many of us spend little to no time maintaining our vehicle's cooling system. I am guessing that the main reason is that coolant problems don't create issues with vehicle operation as quickly as motor oil problems do. Those of us not directly involved with the heavy-duty diesel industry may not have ever seen a coolant-related failure. Or, we may have blamed a failure on something else, not knowing the cause was coolant-related. For example, a piece of equipment that is running abnormally hot may be doing so due to fouling of the coolant system. Scale and deposits in radiators and water pumps are a sign of coolant problems that raise the motor oil temperature and overheat key engine parts. If it continues, this particular issue can lead to overheating and engine failure.

One common question is, "I am using a well-designed, long-life antifreeze, so why do I need to worry about scale, deposits, corrosion and overheating?" This is a good question and is the reason for this month's Tech Talk. So the answer is (drum roll please) ...

Vehicles degrade as they age just like we do - they accumulate more contaminants, more hot spots and develop wrinkles! As vehicles get older, they are at higher risk for combustion exhaust gas leaking into the coolant system, electrical ground problems causing stray voltage, air contamination, salt contamination and hot spots accumulating due to low coolant flow. All of these issues cause the coolant to degrade much faster than if the vehicle was in sound mechanical condition. Catching the issues and correcting the root cause is critical to maintaining the system and enjoying the benefits of long-life coolants in aging vehicles.

Exhaust gases, which are one of the primary causes of motor oil degradation, are also harmful to coolants. When exhaust gases enter the coolant system they accelerate acid development, which degrades the backbone of the coolant. This leads to corrosive wear and general corrosion, which will eventually cause leaks and damage to the cooling system. Additionally, chemical changes in the antifreeze due to acid formation can cause other issues, including wrinkles in hoses and seals, which leads to leaks and introduces air to the cooling system. Acid development can also cause the additive package to drop out of solution so it can't continue to protect the system from wear and corrosion.

Improperly grounded electrical equipment can destroy cooling systems very quickly. In light-duty vehicles this may show up as a heater core leak; in heavy-duty vehicles it can cause problems anywhere the coolant is grounding an electrical current improperly. This can show up as liner pitting, water-pump damage, radiator leaks, oil-cooler leaks or transmission damage. Anytime there is voltage being carried through the cooling system, there is potential for damage.

We don't usually think about air as a source of problems. Air is all around us and we need to continuously breathe it in to survive. Engines need air to burn fuel and generate power, but cooling systems are not designed to be continuously refreshed with air. Leaks causing air to be introduced to the cooling system accelerate acid development, scale and damaging foam. Hoses and seals need to be replaced as they age to ensure that the cooling system is correctly sealed and operating under the pressure it was designed for.

Contamination is another concern for cooling systems. Owners operating vehicles or marine equipment near areas where there is high salt content in the air need to be particularly watchful for leaks and evidence of salt entering the system. When dissolved, sodium chloride introduces chloride ions to cooling systems. Chloride has been proven to be very corrosive to cooling system components and as a result, the ASTM specification is 40 ppm or below. Above this level, the cooling system is at risk of developing this type of corrosion. If levels are significantly higher and stray voltage is present in the coolant system, damage will occur quickly.

Hot spots develop for a number of different mechanical conditions. If the cooling system has excessive air, scale or is running low, hot spots develop. Whenever you get areas of metal that are much hotter than the surrounding area, there is the potential to damage gaskets and warp metal surfaces, leading to other issues. Over time, this can also create more permanent damage to engine parts.

All of this information on cooling systems may seem a little scary, just like going to the doctor in your 50s! Since we can't do anything about the aging process, we have to do the best we can to prevent issues and perform regular maintenance. The same is true of our aging vehicles. Cooling system damage due to maintenance issues is one of the leading causes of vehicle failures. The good news is that it can be prevented for the most part with inspections, new parts and taking care of the coolant with regular checks. Published, AMSOIL Magazine 03/15.

AMSOIL Antifreeze and Coolant provides superior heat transfer and excellent protection against corrosion, freezing and boilover. It provides maximum protection in extreme temperatures and operating conditions, and provides superior protection for aluminum, steel, cast iron, copper, brass and solder alloys.

AMSOIL Signature Series Synthetic Motor Oil

AMSOIL Signature Series Synthetic Motor Oil

AMSOIL Signature Series Synthetic Motor Oils are formulated to meet the latest API SN Resource Conserving and ILSAC GF-5 industry specifications. AMSOIL Signature Series Oils include 0W-20, 0W-30, 5W-30 and 10W-30 and represent the very best motor oils AMSOIL has to offer, allowing motorists to take advantage of maximum extended drain intervals. AMSOIL Signature Series Synthetic Motor Oils are recommended for drain intervals of up to 25,000 miles/one year, whichever comes first (15,000 miles/one year in severe service conditions).

Click here for more information

Premium AMSOIL Synthetic Motor Oils offer the longest drain intervals on the market, unsurpassed protection and performance that effectively extends equipment life and improved fuel economy, saving customers money at the pump and reducing the nation's dependence on foreign oil.



Motorcycle Testimonials

Business Opportunity Testimonials

From The Presidents Desk

AMSOIL Synthetic Diesel Oil Articles and Testimonials

"AMSOIL INC. warrants that the use of its lubricants will not cause mechanical damage to any mechanically sound equipment when AMSOIL INC. products are used in full compliance with the company's recommendations and instructions."


AMSOIL synthetic motor oils are formulated to surpass engine test specifications, offering protection far greater than competing motor oils for extended drain intervals. Most synthetic oil manufacturers make no claim to extended drain intervals, deferring to the maintenance schedule provided by the vehicle manufacturer. With its unparalleled oil and warranty program, AMSOIL offers consumers unprecedented protection and economics.

Another AMSOIL First

More than 20 years ago, AMSOIL began using the NOACK volatility test as a comparison tool and measurement of quality. Back then, nearly every oil tested side-by-side with AMSOIL synthetic motor oils failed, and those that passed barely squeaked by. Other oil companies paid no attention to NOACK results until Ford Motor Company made it a requirement for service fill oils, validating what AMSOIL had said all along.

THE NOACK Volatility Test
The NOACK Volatility Test determines the evaporation loss of lubricants in high temperature service. The more motor oils vaporize, the thicker and heavier they become, contributing to poor circulation, reduced fuel economy and increased oil consumption, wear and emissions. AMSOIL Synthetic Motor Oil resists high temperature volatization better than other motor oils. AMSOIL Synthetic Motor Oil maintains peak fuel efficiency and reduces oil consumption and emissions.

AMSOIL Now An ISO Certified Manufacturer
AMSOIL recently received ISO 9001:2000 certification of our Quality Management System (QMS). NSF International Strategic Registrations is the registrar that has verified our QMS meets the requirements of the ISO 9001:2000 standard, the most widely utilized quality standard throughout the world for quality management systems. ISO standards are used by over 300,000 companies worldwide setting rigorous standards for businesses, government and industry.

ISO 9001:2000 is applicable to any manufacturing and service organization providing a framework for system development that focuses on the customer, quality system performance and ongoing improvement. AMSOIL received ISO 9001:2000 registration under the scope: synthetic lubricants blending, packaging, and other fulfillment directly associated with lubricant product.

The ISO certification puts AMSOIL in line with some of the most efficient companies in the world. It is further assurance that the products and services AMSOIL provides will continue to maintain the high level of quality the company always demanded.

AMSOIL Product Information

Use This Form to Get Exclusive Technical Articles and Information on AMSOIL Products.

Receive valuable weekly newsletter by email - please complete this form.

Personal contact information will only be used to provide requested information or assistance. You will not be enrolled in advertising or marketing programs and your information will not be sold.

You will only receive the email newsletter.

Which AMSOIL Products Are Recommended For Your Car or Truck?
| Click Here And Enter Your Vehicle Information To Find Out |

What Drain Interval Does AMSOIL Recommended For Your Vehicle?
| Click Here For The AMSOIL Recommended Drain Interval Chart |

I welcome the opportunity to work with you personally as your servicing AMSOIL Dealer. Use the information on this website to contact me. You may also check out the AMSOIL Corporate Website for product and business opportunity information.

If you would like more information about AMSOIL INC., click one of the links below: